Hama Passion Clear Serie Instrucciones De Uso página 6

5. Charging
Fully charge the earphones and the charging box once before using them for the first time .
1
Insert the earphones and connect the charging box
USB-C
2
Charging procedure for the charging box and earphones
The status LEDs on the charging box (2) light up white during the charging process . After the
charging box is fully charged, the 3 LEDs on the charging box light up solid white .
The status LEDs on the earphones (3) flash white during the charging process . Once the earphones
are fully charged, the status LEDs (3) light up blue for around 30 seconds and then the status LEDs
go out .
It can take up to 2 .5 hours (earphones) or up to 3 hours (charging box) until the batteries are fully
charged .
CHARGING
3
Battery capacity
Charging box
100% – 70%
When battery levels are low (< 20%), the first of the three status LED (2) flashes white .
Earphones
When battery levels are low (< 20%), you will hear a signal tone once per minute
and the status LED (3) on the earphones flashes white .
The actual battery life varies depending on the use of the device, the settings
and the environmental temperatures (batteries have a limited service life) .
Note
If you have not used the device for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up white during the charging process .
Place the earphones in the charging box . Ensure
that the earphones are inserted into the correct
sides, using the L/R markings as a guide .
Connect the USB-C charging cable included to the
charging socket (8) on the charging box .
Connect the free plug on the USB-C charging
cable to a suitable USB charger . To do this, consult
the operating instructions for the USB charger you
are using .
3
:00
h m
2
:30
h m
70% – 35% 35% – 0%
CHARGED
6