Preparation For Use - Sylvania 6424TFS Manual Del Propietário

PREPARATION FOR USE

CONNECTIONS
Plug the incoming cable into the ANT. jack on the rear of the TV.
Cable
Antenna
OR
TV signal
Incoming cable from home Antenna /
Cable Company (No Cable Box)
Cable Box or
Satellite Box*
OR
IN
Incoming cable from Cable
Company or Satellite Antenna
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.
Note:
For your safety and to avoid damages to the unit, unplug the antenna cable from the
●
ANT. IN jack before moving the unit.
[EXTERNAL CONNECTION]
VIDEO1 input (Rear)
ex.
(OUT)
(OUT)
(OUT)
Video Cassette Recorder
Notes:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
The S-VIDEO jack is given priority over the VIDEO jack on the rear panel.
●
VIDEO2 input (Front)
ex.
Video Camera Video Game
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by hit-
ting [INPUT SELECT] on the remote control. The input mode changes by hitting the button
as following:
TV channel
INPUT
SELECT
• To use the jacks on the rear of the TV, select "VIDEO1".
• To use the jacks on the front of the TV, select "VIDEO2".
UHF/VHF Rod Antenna
(Not supplied)
Rear of this TV
VIDEO 1 IN PUT
VIDEO
L
S-VIDEO ANT. IN
R
OU T
ANT. IN
*Note (DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
S-Video Cable
(IN)
OR
VIDEO 1 INPUT
VIDEO
(IN)
Video Cable
L
S-VIDEO
(IN) R
Audio Cable
Front of this TV
VIDEO
Video Cable
(OUT) (IN)
(OUT) (IN)
Audio Cable
VIDEO1 (Rear) VIDEO2 (Front)
INSTALLING THE BATTERIES
1
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
OPERATIONS
REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
To turn TV on/off
Channel number buttons
CH(ANNEL)
To select channels
To view on-screen menu
Rear of this TV
ANT. IN
L - AUDIO - R VIDEO L - AUDIO - R HEADPHONE MENU VOLUME L K L CHANNEL K POWER
VIDEO L - AUDIO - R HEADPHONE
VIDEO input jack
Note:
If some digits appear in the corner of the screen when the unit is turned on for the first time, hit
●
[POWER] without unplugging the power cord.
SLEEP TIMER SETTING
1
1
SLEEP
2 2
SLEEP
repeatedly
The time increases by 10 minutes
up to 90.
2
3
GAME SLEEP
POWER POWER
DISPLAY
1 2 3
4 5 6
CHANNEL
RETURN
7 8 9
0 +100
INPUT
SELECT
▲/▼ buttons
CH
VOL VOL
CH
MUTE
MENU
MENU button
MENU VOLUME CHANNEL
L K L K
CHANNEL ▲/▼ buttons
To select channels
X X
VOLUME
To adjust volume
MENU button
To view on-screen menu
HEADPHONE jack
AUDIO L/R input jacks
Notes:
When you disconnect the unit from the AC
●
outlet or when you have a power failure, the
sleep time will be lost.
To cancel the sleep timer, hit [SLEEP]
●
SLEEP 0
repeatedly until "SLEEP 0" is displayed.
The Sleep Timer Setting display will disap-
●
pear automatically after 10 seconds of the
operation.
SLEEP 10
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote con-
trol.
GAME button
SLEEP button
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return to previous channel
INPUT SELECT button
To select TV or external input
MUTE button
▲/▼ buttons
VOL(UME)
To adjust volume
POWER
Infrared Sensor Window
POWER button
To turn TV on/off
Y Y
/ buttons