Panasonic CQ-VD7003U Manual De Instrucciones página 34

Monitor lcd en color de pantalla panorámica de 7”/receptor y dvd panaempotrado en el tablero de instrumentos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Settings
SCREEN
USER
(Display)
DIMMER
33
Adjusting the brightness
AUTO
: automatically adjusted according to
ambient light intensity.
1
2
3
Darker
PICTURE
Display appearance
CONTRAST
]
: decreases the contrast between black and white
[
: increases the contrast between black and white
BRIGHT
]
: darkens
[
: lightens
COLOR
]
: lightens the depth of color on the display
[
: deepens the depth of color on the display
TINT
]
: emphasizes red in the color image
[
: emphasizes green in the color image
34
CQ-VD7003U
(continued)
AUDIO
DVD
INPUT/OUTPUT
4
Brighter
default:
(Adjust the image contrast)
(Adjust the image brightness)
(Adjust the image color depth)
(Adjust the image tone or tint)
AUDIO
RADIO
USER
SCREEN
SOUND SETUP
Sound Set Up
SOUND EFFECT
THROUGH
GEQ
CS Auto
AUTO
GRAPHIC-EQ
Graphic-equalizer
Six EQ presets are already provided at shipment in this
unit. To recall a preset memory , select the correspon-
ding preset buttons [1] to [6] .
1
: (Flat) flat frequency response
2
: (Rock) speedy and heavy sound
3
: (Pop) wide-ranged and deep sound
4
: (Vocal) clear sound
5
: (Jazz) jazz-specific deep sound
6
: (Club) club and disco-specific sound
You may set your own EQ or modify factory preset-
tings in each memory button by following the instruc-
tions below:
Adjusting level of each preset
The level of each of the 7 frequency bands can be
adjusted.
q Select the preset number that you prefer to adjust.
w Touch/press
quency.
e Touch/press the same preset number for more than
2 seconds.
Frequency band
60
160
Adjustment range: –12 dB to +12 dB (in 2 dB steps)
Note:
¡The new level adjustment will overwrite the previous
level adjustment.
¡For resuming the factory settings, touch and hold
(INIT (initialize)) for more than 2 seconds .
DVD
INPUT/OUTPUT
(Sound effect setting)
: No GEQ or CS Auto setting
: Goes to GEQ setting
: Goes to CS Auto setting
default:
(Graphic-equalizer)
/[{][}] to adjust each fre-
400
1 k
3 k
6 k
default: ± 0 dB for each band
RADIO
THROUGH
16 k
(Hz)

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido