Panasonic CQ-VD7003U Manual De Instrucciones página 44

Troubleshooting
■
MP3/WMA
No playback or disc
ejected
43
The CD-R/RWs that are
playable on other
devices are not playable
on this unit.
Sound skipping or noise
Note:
¡Refer to "Notes on MP3/WMA"
■
DVD
Cannot switch the audio
language/subtitle
language/angle.
The audio/subtitle
language selected in the
DVD settings is not
used.
A DVD-R or DVD-RW is
not playable.
■
Display Settings
The brightness of the
screen is not stable.
The picture is dark. The
picture is whitish. Something
is wrong with the picture.
The picture is light in color.
The display does not go
back into the unit.
44
CQ-VD7003U
(continued)
The disc has unplayable formatted data.
aRefer to the description about MP3/WMA for playable sound data except CD-
DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable
on other devices such as a PC.
aMake CD-R/RWs in a different combination of media, recording software
and recorder after referring to the description about MP3/WMA.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3/WMA, refer to
the description about MP3/WMA.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
(a page 24)
¡It is not possible to switch if the disc does not have multiple audio
languages/subtitle languages/angles recorded on it. (Refer to the guide provid-
ed with your disc.)
¡Some discs permit switching through a menu screen.
¡Sometimes, switching angles is possible only with certain scenes.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching through a
menu screen. Refer to the guide provided with your disc.)
The disc is still unfinalized.
aFinalize the disc.
Refer to "Before Disc Playback" (
a
( page 48) for other cases.
AUTO dimmer is selected.
aSelect one of the dimmer levels from among 1 to 4 to make the dimmer
adjustment become free from light intensity.
The screen is not adjusted properly.
aMake every adjustment of the screen.
The monitor stops on the way to the home position.
a
Press [OPEN] (CLOSE).
a
page 18) or "Notes on Discs"