Sony XAV-70BT Manual De Instrucciones página 51

Item
Rotary Commander
Changes the operative
direction of rotary commander
controls.
AUX1 Input (page 56)
Sets the type of device
connected to the AUX1 IN
terminals to switch the
background screen
accordingly.
AUX2 Input* (page 56)
Sets the type of device
connected to the AUX2 IN
terminals to switch the
background screen
accordingly.
No Signal
Changes the screen
automatically when no
external video signal is
detected.
Camera Input
Activates the video input from
the connected rear view
camera.
Rear View Camera Setting
(page 57)
Monitor Angle (page 47)
* When a device is connected to BUS CONTROL IN, "Sony BUS Input" appears instead of "AUX2 Input," and only
options "Video" and "Audio" are selectable.
Option Purpose
Default (z) To use in the factory-set
position.
Reverse To use on the right side of
the steering column.
Video (z)
To show the picture from
the connected device.
Audio To show this unit's
background screen.
OFF To deactivate the AUX
input.
Video (z)
To show the picture from
the connected device.
Audio To show this unit's
background screen.
OFF To deactivate the AUX
input.
Through
To show the no signal
screen.
Blank (z) To show the audio playback
screen with no signal
notification.
OFF To deactivate the input.
ON (z)
To show the picture from
the rear view camera when
the back lamp lights up (or
the shift lever is set to the R
(reverse) position).
–
–
– –
Unit status
Any status.
Unit off.
Unit off.
Unit off.
Any status.
Any status.
Any status.
51