Electrolux FRIGIDAIRE LC10 Guía De Uso página 12

6
using Washing Cycles button, select the
type of program you want to run according
to clothes to be washed. This button can be
turned to both sides.
7
Turn the product on by pressing the On/
Off key. A LEd will light next to the key
indicating the machine is on.
Perfect Dilution
during the filling of your machine, you can not
see the water falling directly on the clothes.
The filling both washing and rising, is done
by Perfect Dilution. The water enters by the
dispenser carrying soap, bleach or softener.
The mixture is first directed to the intelligent
dilution, where is previously dissolved/ diluted.
Then this mixture (already dissolved/diluted) is
driven directly to the drum bottom, the filling
process of your washer happens from drum
bottom up.
12
water
soap/
softener/
bleach
diluiter
drum
water tank
8
if you want, use the washing options by
pressing the corresponding key:
9
if you want to change the washing steps,
press the Skip Steps key until the indicator
LEd is in the desired position.
10
Wait 5 seconds and the machine starts
working. At the end of each program
the washer automatically turns off and the LEd
next to the on/off key turns off.
After pressing
programming may still be changed. After
this change wait 5 seconds for the washing
machine starts working again.
If you stop the washing process before
the end of the complete cycle (examples:
blackout, the On/Off key pressed), when turns
the washing machine on again, the cycle
restarts.
WARNING
Do not fill the washing machine with the
help of a bucket or hose.
the On/Off key, the