Bushnell Fusion 1 Mile ARC Manual Del Usuario página 10

BATTERY LIFE INDICATOR
Battery Indicator:
Full charge
1/2 battery life remaining
Very low charge level (not blinking)
Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.
UNIT OF MEASURE OPTIONS
The Fusion 1 Mile ARC can be used to measure distances in yards or meters. The unit of measure indicators are
located in the lower right portion of the Matrix Display.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
SELECTIVE TARGETING™ MODES
The Fusion 1 Mile ARC was especially designed with hunters in mind. The selective targeting modes allow you to
adjust the performance parameters of the unit to suit your specific situation and environment. To move from one
mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the
MODE button and quickly release. The different targeting modes available and mode indicators are listed below:
Standard with Automatic SCAN (Display Indicator – none) This setting allows most targets to be distanced up
to 1760 yards. Used for moderately reflective targets that are typical of most distancing situations. The minimum
10