ARDES AR5R05T Instrucciones Para El Uso página 20

Enfriador evaporativo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1c
7
6
Batteries
Remote control is supplied with battery inside (CR2025 type, 3V); remove
the transparent sheet from the battery cover before use remote control.
When the battery is over, it must be replaced with the same type.
To remove battery, follow the drawing on the back of remote control.
ON/OFF Button (A):
• Press On/Off button one time to activate the fan. The unit will start to
operate and lower speed and the 1a indicator light will illuminate on
the display.
• Press On/Off button when unit is on to turn it off.
SPEED Button (B):
• Press Speed button when unit is on to select the desired air speed:
low, medium or high. The selected speed is indicated by indicator light
on the display: 1a (low speed), 1b (medium speed), 1c (high speed).
WIND MODES Button (C):
• When the unit is operating, you can select the desired wind mode:
natural mode (indicator light number 3 will be on in the display),
sleeping mode (indicator light number 4 will be on in the display) or
normal mode (both indicators light 3 and 4 will be off in the display).
TIMER Button (D):
• When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press Timer button repeatedly to select
the desired time period in half hours increments from 0,5 hours to 7,5
hours. The related indicator light (0,5H, 1H, 2H, 4H) will illuminate on
the control panel. When all the indicator light are off means that timer
is not setted and the unit will continuously work until you switch off
20
1a
1b
5
Indicator lights
1a. Low speed light
1b. Middle speed light
1c. High speed light
2. Timer lights
3. Night mode light
2
4. Natural mode light
3
5. Stand-by
6. Cooler
4
7. Swing

Publicidad

Tabla de contenido
loading

Tabla de contenido