Publicidad
Idiomas disponibles
Idiomas disponibles
Per f o r m an ces
1.For the juicer with large diameter, entire apple or pear can be put in
for juicing, no cutting apart needed, easy and quick.
2.Design is fine, simple, and beautiful, with combined structure,
easy to operate and clean.
3.High speed electric motor with overheating protection is adopted,
high efficiency, time saving, energy saving, high service life of the
motor.
4.Safety lock unit for switching is specially designed, in order to
make sure safety and reliability in use.
At t en t io n b ef o r e usin g
1.This machine is set with safety unit, when the handle does not
fasten the cover or the cutter seat is not fastened, the motor cannot turn,
so as to ensure safety for the user.
2.When disassembling or assembling the juicer, press the upper of feed
port of the cover with your hand, then force the handle to slide in or out
of cover slot.
3.When disassembling juicing net, first remove the cover and
residue barrel, then turn the middle ring up to 30 degrees by holding
juicing nozzle with your hand, and take up, the juicing net will
automatically leave the rotor.
4.In order to avoid damage, before using, first check power supply for
compliance with rated voltage .
5.Clean all parts able to disassemble (refer to the section of
"maintenance and cleaning").
6.When assembling, please carefully read the diagram of "name and
position of main components".
7.Please carefully read the "attentions" before using.
Juicin g
1.Before using, please confirm the button switch of the main
machine in stop state, in this way, in case assembly is not
completed, starting the main machine can be avoided, so
unnecessary damage for persons or property avoided.
2.Before juicing, first confirm juicing net and rotor clutched in
position, and no hard contact between juicing net cutter and
transparent cover. Put the transparent cover on, put the handle into
21
Publicidad
