Bissell POWEREASE 2253 Serie Guia Del Usuario página 7

Empty the Dirt Tank
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once Dirt Tank is full.
3
Hold the Dirt Tank over a trash container.
Press the bottom release button to
empty. Once empty, close the lid.
5
Clean Cyclone with warm water and mild
detergent. Let cyclone dry completely
before replacing. To replace, fit into place
and twist to the right.
NOTE: The Dirt Tank may be washed in warm water with a mild detergent. Make sure it
is completely dry before replacing.
2
Press the Tank Release Button and pull
out to remove Dirt Tank.
4
Twist Cyclone left and pull down to
remove from tank.
6
click
After emptied,
place tank back
on vacuum and
press firmly until
you hear "click."
www.BISSELL.com
7