ABC Design Turbo 6S Instrucciones De Uso página 5

• Combination travel system with convertible attachment
• Height-adjustable telescopic handle
• Four-position backrest
• Swivel mode and locked setting on front wheels
• Hood featuring magnetic-action viewing panel
Care instructions
• The materials used to manufacture our products comply with the AZO requirement, EN71-2 and EN71-3, and light fastness
standards for textiles. Nevertheless, we advise you not to leave the product exposed to bright sunlight for any length of time. No
claims may be made for wear and tear or if the colours fade when exposed to strong sunlight. The fabric covers on this product
can be washed by hand or on a cold cycle in the washing machine (mild detergent).
• An ABC Design rain canopy is available in retail stores offering complete protection against the rain.
• All the frames on our products have been tested for conformity with EN1888 : 2005 and have met the required standards. In
order to maintain the safety of the product it is necessary to oil the moving parts or tighten the rivets as and when required.
NB: Please do not use any product for lubrication other than silicone oil or silicone spray lubricant.
• Regular care and upkeep have a major part to play in maintaining the safety and value of the product. Exposure to such things
as salt in the air, road-gritting salt or acid rain will encourage the onset of corrosion, as will inappropriate storage of the product.
• We recommend regular maintenance of all coated parts. In serious cases of soiling please clean the surface coating
immediately.
• Check for loose parts and fastenings from time to time and tighten if necessary.
Safety instructions
Read these instructions carefully before use and keep them for future reference. Failure to read these instructions may
compromise the safety of your child.
NB:
• This model is suitable for infants from 6 months (from birth with carrycot) and up to a maximum weight of 15 kg.
• The net bag can carry up to 2 kg.
• This pushchair is designed to transport a child.
• Do not use any accessories other than those approved by the manufacturer.
• You are advised to take your child out of the pushchair as a matter of principle when negotiating steps or flights of stairs or if the
pushchair needs to be lifted or carried.
• If you are using a carrier, ensure that it is correctly attached to the pushchair.
CAUTION:
• Do not leave your child unattended.
• The only mattresses suitable for use are those up to 50 mm thick.
• Use a safety harness as soon as your child can sit independently.
• This seat is not suitable for babies under 6 months old.
• Loads attached to the handle affect the stability of the pushchair.
• Before use, check that the pushchair attachment or seat is correctly engaged in position.
• This product is not suitable for jogging or skating.
• Do not make any modifications to the product which compromise its safety.
• Keep this product away from fire and other sources of heat.
Customer complaints
• No claims may be made for natural wear and tear or for damage caused by undue demands on the product or by exceeding the
permissible load.
• No claims may be made for damage caused by improper use.
• No claims may be made for damage caused by incorrect assembly or operation.
• No claims may be made for damage caused by improper modifications to the product.
• Areas of rust may appear through lack of maintenance or improper care and do not constitute a fault with the product.
• Scratch marks are normal signs of wear and do not constitute a fault with the product.
• Mildew is likely to appear on textiles which are not dried out after getting wet and cannot be attributed to shortcomings in
production conditions.
• The product may fade if exposed to sunlight, perspiration and detergents, or if subject to abrasion or excessive washing,
therefore fading cannot be attributed to a fault with the product.
• No claims may be made for wheels which become worn out as a natural result of wear and tear.
EN - 08
• Weight: 16,0 kg
• Tested for conformity with EN 1888 : 2005
• Compatible with ABC Design "Rider" car seat
• Compatible with ABC Design "Kiddie Ride-On" buggy board
1. Opening the pushchair
Pull the handle on the stroller (1) upwards until the frame clicks
into place (2).
CAUTION: Ensure that all the catches are engaged before use.
2. Fitting the wheels
Press the button (1) and insert the rear wheel in the slot (2) until it
engages.
To remove the wheels, press the button (1) to release the wheels.
The wheels can then be removed from the axle.
Mount the front wheels by sliding the wheel assemblies onto the
prongs until they click into place.
To remove the wheel assemblies, press the button underneath the
blocks and remove the assemblies.
3. Wheel locking and swivel settings
Push the lever downwards to lock the wheels.
Push the lever upwards for swivel position.
4. Operating the brake
Press the lever down to engage the brake.
Press the lever up to disengage the brake.
5. Attaching and converting the seat
Attach the seat by placing it on the frame until it clicks into place.
To convert the seat, press the buttons on both adapters and lift up
the seat.
1 1
2 2
2 2
3
4
5 5
EN - 09