Whispbar K607W Instrucciones De Montaje página 7

EN
Fitting Kit
K607W
Using 5mm hex key, screw M8 grubscrew
into fixed-point, leaving 12mm (1/2") visible.
Place M8 washer over grubscrew.
Install adaptor onto vehicle.
Tighten with provided 10mm (3/8")
spanner.
Screw M6 grubscrew into adaptor. Tighten
using 3mm (1/8") hex key.
Do not over tighten.
Repeat for all four positions.
7