Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Fitting Kit
K493W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Clamps to vehicle using body clips.
Please check the rear of this manual for
information relating specifically to your
vehicle.
Pull down rubber and slide body clip up
and over the interior trim. Refit the rubber
over the clip.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
7
Publicidad
Tabla de contenido
