TECshow THUNDERSTORM Manual De Usuario página 4

LED Display Instruction
A B
Operating Instruction: press button marked as "A" to select a
function, For details, please see the "OPERATION MENU" section.
Press button marked as "B" or button marked as "C" to modify
values . Press button marked as "D" to save your settings.
LED Digital Display Operation Menu:
No.
1
2
3
4
1. When starting up,it will display the last time's operation .In
case without any buttons,it will close screen automatically
after 20seconds.When no dmx,the first dot of led display will
keep on.When has dmx,the first dot will blink
2. The master light can choose any mode of Auto/Soun
modes, the slave light is set as A001, Just one light could be
settled to be master.
3. At most 10 lights could be linked in one electricity source.
Function:
1. Press MENU to select Addr / Chnd/NAnu/ SHOU /CoLo/
SPEE/ Auto/Soun / Version , Press ENTER to the next menu
or save, Press UP / DOWN to select function, Press ENTER to
save; Long Press MENU to exit.
2. Addr, Address setting, DOWN/UP to select 1-512
3. Chnd, Channel setting
4. NAnu, LED brightness adjust and laser(on or off)
THUNDERSTORM
ENGLISH VERSION
E
C D
Menu
Addr
Aut1,Auto Play1,six colors led derby effect auto play
AUTO
Soun
Vers
A. Function button (MENU)
B. UP button (UP)
C. DOWN button (DOWN)
D. Enter button (ENTER)
E. LED display
Function
DMX address DOWN/UP to +/- (1-512)
Aut2, Auto Play2, white led auto play
Aut3,Auto Play3, laser auto play
Aut4,Auto Play4, all effects auto play
SPEE,auto speed 0-99
Sou1,Sound Active 1
Sou2,Sound Active 2
Sou3,Sound Active 3
SESE,sound sensitivity 0-99
Ve1.0
5. ShoU, select scene and show
6. CoLo: select color
7. SPEED: Auto speed
8. Auto: Auto mode
9. Soun: Sound mode
10. Vers: version
p. 4