SILVERADO 1500/2500HD/3500 SERIES CREW CAB. ( 8' )
1. Before beginning the installation, please read all directions carefully and verify that all necessary hardware is accounted for. If
any parts are missing, stop the installation and contact your distributor immediately.
2. Side bar set consists of a driver and passenger side. Make sure to determinate the correct side before installation. See
illustration 2.
3. Locate and remove the supports of the body mount, front, middle and rear part, (once a time). See illustration 3.
4. Place the front bracket see illustration 3. Attach with bolts previously before removed. NOTE: If the bolts before removed are
short, attach with: ( 1 ) M12 x 120mm hex head bolts, ( 1 ) 1/2" flat and lock. By each bracket. Leave loose. See illustration 3.
5. Install the rear and middle bracket of the same form that front bracket. Seer illustration 3. In the rear bracket aligns the all
threaded stud as one is in illustration 3, make sure that aligns on the frame.
Note: For the assembly of the Side Bar front and rear, see sheet 3.
6. Place the side bar on the brackets and attach the front and rear part with: ( 1 ) 1/2 x 2" hex head bolt, ( 1 ) 1/2" flat and lock
washers. By each bracket. Leave loose. See illustration 3.
7. Attach the side bar on middle bracket with: ( 1 ) 3/8 x 1 1/4" hex head bolt, ( 1 ) 3/8" flat and lock washers. Leave loose. See
illustration 3.
8. Align the side bar to the vehicle and tighten all hardware.
9. Repeat for the other side of vehicle.
10. Fill out the warranty card included and place it inside your vehicle.
FRONT BRACKET
Body mount
1
REAR BRACKET
11
9
8
2
Cleaning and care instructions:
Keep your product clean. Do not use abrasive cleaners or polish. We recommend only non-abrasive automotive wax such as pure
carnauba to avoid scratches or rust.
Revised 17/07/2009
INSTALLATIONS INSTRUCTIONS
6064M SIDE BAR
ILLUSTRATION 3
13
14
15
16
14
15
FOR TECHNICAL OR WARRANTY INFORMATION CALL:
TOLL FREE (888)427-4466 FAX (714)672-0278
GO RHINO! Products® 591 W. Apollo St. Brea, CA 92821
Design :
2 de 3
MIDDLE BRACKET
2
7
8
9
16
14
15
Body mount
8
9
11
13
14
15
16
14
15
Quality:
99 - 09
Body mount
6
10
8
12
FODI7.003-I