Cequent Performance Products 24935 Instrucciones De Instalación página 4

1. Remove (3) underneath rivets and (2) rivets on the wheel well on both
sides.
3. Remove (2) rivets inside trunk on both sides to get access to the tail light
fasteners.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Open tail gate and remove (1) screw below each taillight with a phillips
screwdriver on both sides.
4. Disconnect wire for taillights and remove (4) flange nuts on both sides
with an 8mm socket to take off the taillights.
Sheet 4 of 15 24935NP
9-29-15 Rev. B