Kensington KeyFolio SecureBack Manual De Inicio Rápido página 7

• Anytime a key is pressed in sleep mode, the keyboard should automatically connect to
last paired iPad if present. If iPad is not found after waking from sleep mode within 30
seconds, the device should go back to sleep.
LED Behavior and Explanation
LED Behavior
Optional. ClickSafe Lock Sold Separaetly
(www.kensington.com/clicksafe).
(K64637)
ClickSafe® Keyed Laptop Lock
Explanation
• If the Keyfolio is off, asleep, or the battery is dead, the LEDs will remain
off.
• Initially at power-up, the Power and Bluetooth LEDs will turn on and stay
lit for 5 seconds.
• After 5 seconds the Bluetooth LED will turn off, followed by the Power
LED 0.5 second later.
• When the Bluetooth Connection Button is pressed, the Power LED will
stay solidly lit, while the Bluetooth LED will begin to blink for 10 minutes
or until connected to an iPad.
• Blink pattern: ON 1s, OFF 0.5s
• Once the Keyfolio is connected with your iPad, the Power LED will remain
lit and all others will go off.
• Also, if the Keyfolio is awoken from sleep mode, the Power LED will turn
on immediately.
• While the Keyfolio is connected to your iPad, the state of the Caps Lock
toggle is shown by the Caps Lock LED.
• When the Keyfolio is plugged into a power source, the Charge LED will
turn red and turn off only when charge is completed.
ClickSafe® Combination Laptop Lock
7
(K64697)