Device Connection; Network Connection - Sveon SNT1011 Manual De Usuario

7. Device connection

7.1 PC Connection
1. Connect the device to an available USB port of your
PC. The device will be recognized automatically and the
window of the installation wizard for a new device will ap-
pear.
Click on "Next" to continue.
Wait until your operating system finishes the installation
of all the elements. Click on "Finish".
2. If you want to check if the device has been properly installed, right click over
"My Computer" icon. Select "Properties", "Hardware" and click on "Device Ma-
nager".
In "Network adaptors" it should appear the following device: "Realtek
RTL8188SU Wireless".
7.2 Media Player connection
You can use the Wireless adaptor to connect a compliant media player to a local network and play you rmultimedia files
in streaming mode without the needing to download or copy them previously. Please follow the indications shown in the
user guide of your media player to complete the network connection.
To get the maximum performance in the network connection, we suggest you to use a N router.
Important. The SNT1011 adaptor is compliant with the Sveon media players SPM200, SPM250, SPM3000 and SPM3500.
For further information about compliant devices please visit our official webiste: www.sveon.com.

8. Network connection

8.1 Infraestructure connection mode
Important. Infraestructure mode is the option selected
by default in the setup wizard.
1. Run the program.
2. Click on "Available networks" to connect to your wi-
reless network. Double click over your network name.
Note: Click on "Update" if you want to update the avai-
lable network list.
SNT1011 User Guide
Index
1. Welcome
2. Features
3. Technical Specifications
4. Content
5. Hardware
6. Driver installation
7. Device connection
7.1. PC Connection
7.2. Media player connection
8. Network connection
8.1. Infraestructure connection mode
8.2. Ad Hoc connection mode
9. MAC specifications
English 11