Sveon SNT1011 Manual De Usuario página 12

A setup window will appear.
3. Enter the network password of the network
you want to connect to in the option "Network
Password". Then, enter it again in the option
"Confirm the network password" and click on
"Accept" to fnish the connection.
8.2 Ad Hoc Connection mode
1. Run the program.
2. Click on "Mode" and select the option "Point to point"
as shown in the picture.
3. How to create a new SSID (access point name):
- Click on "Setup".
- Add a name for the new profile in the section "Profile name" and a name of the
Snetwork (SSID) in "Network name".
- In "Wireless network security", "Network authentication" you can chosse between
the following options:
Open System
. Select this option if you want to use a WEP password. In "Open
System" mode you can choose between the following data codification:
• Disabled. Choose this option if you don´t have a WEP password or if you don´t
want to assign it.
• WEP. It allows you to assign a password for wireless network connection to res-
trict the access to the network only to the users who know the password.
SNT1011 User Guide
Index
1. Welcome
2. Features
3. Technical Specifications
4. Content
5. Hardware
6. Driver installation
7. Device connection
7.1. PC Connection
7.2. Media player connection
8. Network connection
8.1. Infraestructure connection mode
8.2. Ad Hoc connection mode
9. MAC specifications
English 12