GE AEW18 Serie Manual Del Propietario Y Instrucciones De Instalación página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, electric
shock or personal injury.
SAFETY PRECAUTIONS
Use this appliance only for its intended
n
purpose as described in this Owner's
Manual .
This air conditioner must be properly
n
installed in accordance with the Installation
Instructions before it is used .
Never unplug your air conditioner by pulling
n
on the power cord . Always grip plug firmly
and pull straight out from the receptacle .
Replace immediately all electric service
n
cords that have become frayed or otherwise
damaged . A damaged power supply cord
must be replaced with a new power supply
cord obtained from the manufacturer and
not repaired . Do not use a cord that shows
cracks or abrasion damage along its length
or at either the plug or connector end .
Turn the unit OFF and unplug your air
n
conditioner before cleaning .
GE does not support any servicing of the
n
air conditioner . We strongly recommend
that you do not attempt to service the air
conditioner yourself .
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord .
For personal safety, this appliance must be
properly grounded .
DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric
shock hazard from this appliance .
Power cord includes a current interrupter device .
A test and reset button is provided on the plug
case . The device should be tested on a periodic
basis by first pressing the TEST button and
then the RESET button while plugged into the
outlet . If the TEST button does not trip or if the
RESET button will not stay engaged, discontinue
use of the air conditioner and contact a qualified
service technician .
2
For your safety...do not store or use
n
combustible materials, gasoline or other
flammable vapors or liquids in the vicinity
of this or any other appliance .
All air conditioners contain refrigerants,
n
which under federal law must be removed
prior to product disposal . If you are getting
rid of an old product with refrigerants, check
with the company handling disposal about
what to do .
If the receptacle does not match the plug,
n
the receptacle must be changed out by a
qualified electrician .
These R410A air conditioning systems
n
require contractors and technicians to
use tools, equipment and safety standards
approved for use with this refrigerant .
DO NOT use equipment certified for
R22 refrigerant only .
Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet
is properly grounded .
Where a 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded
3-prong wall outlet .
The air conditioner should always be plugged
into its own individual electrical outlet which has
a voltage rating that matches the rating plate .
This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires .
See the Installation Instructions, Electrical
Requirements section for specific electrical
connection requirements .

Publicidad

Tabla de contenido
loading

Tabla de contenido