Stell SHO 2020 Manual Del Usuario página 13

Mounting the brackets on the TV set
TV set with fl at rear wall (Fig. 5)
First, fi nd the screws suitable for mounting the TV set (C/D/E/F): try to screw them manually in the holes
at the back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw with
correct threat, proceed according to the drawing 5. Insert matching lock washer on the screw (G/H/I/J),
washer (M/K) and then screw the screw to the bracket B and then to the TV. Check that the brackets are
fastened vertically. They are mutually parallel and the locking bolts are facing towards the outer edge of the TV.
Attaching the TV set to the holder
Warning: Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the brackets attached to the TV set (B) to the top edge of the body of the holder A, then push
the bottom part of the brackets to the bottom of the body of the holder. (Fig. 6). Afterwards pull on the safety
chains on the brackets according to Fig. 7. This will lock the locking mechanism on the bracket, which will be
then fi rmly attached to the body of the holder.
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
13 – EN