General And Safety Information; Introduction, General Cautionary Notes; Purpose Of This Manual - SAP TC32PC Manual De Instrucciones

____________________________________

INtRODuCtION, GENERAL CAutIONARy NOtEs

We advise you to carefully read the instructions contained in this booklet. If you wish to make
the best use of the meat mincer and exploit all its possibilities you must be thoroughly familiar
with its performance and operating features.
the MEAt MINCER may only be used for mincing fresh meat.
EN EN
Maintenance requires just a few simple operations that may be carried out by the operator. To
ensure a long life and minimize the operating costs you should carefully follow the rules given
in this booklet.
The manufacturer has designed the MEAT MINCER to ensure safe operating conditions:
exclusion or removal of the safety features installed by the manufacturer will seriously undermine
the guaranteed safety conditions. To ensure these conditions you must also fully comply with
the instructions regarding the installation and power supply of the MEAT MINCER.
The MEAT MINCER must be installed in a work environment free of corrosive agents. The
installation site must not be subject to explosion,
the manufacturer company is not liable for any breakdowns, accidents or faults caused
by a failure to observe (or to apply) the instructions contained in this booklet.
It is likewise not liable for any modifications, variations or the installation of the
accessories not previously authorized.
use only original spARE pARts.
IMpORtANt
The instruction booklet is an integral part of the MEAT MINCER and must be kept in
a safe place. The features, information and drawings published in this booklet are
the exclusive property of the manufacturer company. No part of this publication may
be reproduced or transmitted in any form.
tRANsFER OF OWNERsHIp
If you sell the MEAT MINCER, you must notify the manufacturer company of the address of the
new owner so that any additions to this booklet may be forwarded to the latter.

purpose of this manual

- This operation and maintenance manual, that is integral part of the machine standard
equipment, has been written by the Manufacturer in his own language to give the necessary
information to all authorized operators who interact with the machine in the period of its
expected work life.
- The time dedicated to the reading of the information will avoid any aspect which might
endanger the safety and health of people and economic damages.
- The Manufacturer has the right to modify the information reported into the manual without the
duty to communicate it providently, on condition that they do not affect safety.
- Some parts of the text have been highlighted in order to underline the importance of the
message.

GENERAL AND sAFEty INFORMAtION

- 14 - English language