DeWalt DC800 Manual De Instrucciones página 14

All manuals and user guides at all-guides.com
• Material: The type of material and surface finish of the material
will affect fastening torque.
• Fastening Time: Longer fasten ing time results in increased
fastening torque. Using a longer fastening time than recom-
mended could cause the fasteners to be overstressed,
stripped or damaged.
Your impact tool generates the following output torque:
Cat # Ft.-Lbs. In.-Lbs. Nm
DC800 325 3900
DC810 160 1920
DC815 117 1400
MAINTENANCE
WARNING: To reduce the risk of injury, turn unit off
and disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. An accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air
at least once a week. To minimize the risk of eye injury, always wear
ANSI Z87.1 approved eye protection when performing this.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC
outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or soft non-metallic brush. Do not
use water or any cleaning solutions.
Accessories
D
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
this product.
Recommended accessories for use with your tool are available at
extra cost from your local service center. If you need any assistance
440 in locating any accessory, please contact D
701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-D
215
(1-800-433-9258) or visit our website: www.dewalt.com.
160
may break and cause a hazardous condition. Inspect accessories
prior to use to ensure that they con tain no cracks.
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
• CONFIRMATION OF OWNERSHIP: In case of an insurance
12
WARNING: Since accessories, other than those offered by
WALT, have not been tested with this product, use of such
WALT recommended accessories should be used with
E
WARNING: Use only impact accessories. Non-impact accessories
WALT factory service center, a D
E
obtain more efficient warranty service in case there is a problem
with your product.
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.
WALT Industrial Tool Co.,
E
WALT
E
WALT
E