Placing Sit-On High - Guldmann 2950 1 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
8 .00

Placing Sit-On High

The Sit-On High slings should always be
put on in a lying position.
Bend or cross one leg (upper) towards
the side you wish to roll the user.
Pass the arm on the same side forward
over the chest.
Have the user turn his/her head in the
same direction.
To ensure the sling is centered, the center
mark on the sling should follow the user's
backbone.
Position the dart of the sling opposite the
user's hip.
The upper edge of the sling
must support the user's head.
Turn the user onto his/her back and pull
the sling out on the other side.
Make sure to use the correct width of
lifting hanger.
Check that the sling does not move
up under the thighs when lifting from
a lying position.
Attach the lifting straps on the lifting hanger.
24

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2960 1 serie

Tabla de contenido