PrODUCT
SET-UP
CD set-uP WiZarD
aDVaNCeD set-uP (aCCess Via iP aDDress)
to configure dcs-2130 using a static Ip, connect your dcs-2130 directly to your computer's
ethernet port using the ethernet cable provided. ensure that your computer is also set to a static Ip
of address of type 192.168.0.x. then connect the power cable on the dcs-2130. the dcs-2130
power light will display as solid red first, then shortly turn to green.
then simply open a browser window and enter the Ip address in the browser address field:
DCs-2130
SET-UP WIZArD CD
the cd contains all of the instructions required to set-up dcs-2130
INSErT CD
Insert the cd into the cd drive of your computer. the set-up
wizard should start automatically. make sure that your internet
connection is active. (do not plug in dcs-2130 yet)
SET-UP WIZArD
select your language from the list of options and follow the
steps within the wizard to complete the set-up of dcs-2130
Ip addRess: http://192.168.0.20
useRname: admin
passWoRd:
3