Amplicomms TCL 410 Instrucciones De Uso página 24

• Near computers and TV's
• Inside moving vehicles.
Place your clock at a location with optimal signal, i.e. close to a
window and away from metal surfaces or electrical appliances.
Radio controlled time signal reception
After your clock is powered up, it starts to receive radio controlled
time signal with the time digits at low brightness. The
flashes.
• Receiving signal (
• Successful reception (
• Failed reception (
Reception mode and signal strength
During reception, press WAVE/M once will display reception
mode and signal strength indication:
• When strong signal is detected, display shows with 3 bars
.
• When weak or no signal is detected, display shows
or
• During reception, the signal strength may move from 1 bar to
2 bars to 3 bars. This is normal since the clock is detecting
radio controlled time signal and other signals in the air at the
same time.
• Press WAVE/M once will return to the time display with
LED flashing.
(See chapter "Helpline" for costs and hours of operation)
LED flashing)
LED becomes static)
LED disappear).
.
Helpline UK 0844 800 6503
G
ETTING STARTED
LED
21