Amplicomms TCL 410 Instrucciones De Uso página 29

S
ETTING
Use smoke alarm detection
1. Press and hold SMOKE/L button, the
and smoke alarm detection is activated. Once the
microphone of your clock receives the alert sound of a
smoke alarm, the
you by:
• Flashing "AL" display
• Alarm sound (depends on the alram volume setting)
• HI brightness of flashing LED
• Shaker vibration.
2. To stop the above 1-4 alarms, press SMOKE/L button
once.
Caution: the smoke alarm
detection is effective 2.5 to 3
meters down from the smoke
alarm device. It does not cover a
larger area nor being effective
across the room.
Check from time to time if there is any debris in the microphone
opening. Clean it with a soft brush if need.
26
/ O
PERATION
LED flashes and your clock will alert
LED remains static.
Helpline UK 0844 800 6503
(See chapter "Helpline" for costs and hours of operation)
LED is turned on