Pioneer MVH-S215BT Manual De Instrucciones página 4

Setup menu
When you turn the ignition switch to ON after installation, [SETUP:YES]
appears in the display.
1
Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer
not to set at this time, turn the M.C. dial to select [NO], then press to
confirm.
2
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item Description
CLOCK Set the clock.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM STEP Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
3
[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select
[QUIT :NO], then press to confirm.
4
Press the M.C. dial to confirm the settings.
NOTES
• You can cancel the menu setting by pressing SRC/OFF.
• These settings can be made at any time from the SYSTEM settings (page 9) and INITIAL
settings (page 4).
Canceling the demonstration display (DEMO
OFF)
1
Press the M.C. dial to display the main menu.
4
En
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4
Turn the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1
Press and hold SRC/OFF until the unit turns off.
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [INITIAL], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item Description
FM Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
DIMMER Change the display brightness.
Select [SYNC CLK] to set the duration of activating
[SYNC CLK],
dimmer.
[MANUAL]
Select [MANUAL] to turn on/off dimmer by a press and
hold of BAND/DIMMER button.
RESET Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [NO]
(Some of the settings may be retained even after
resetting the unit.)