8" (20.3 cm) Max
21" (53.3 cm)
3-1/8" (7.9 cm)
3-1/2" (8.9 cm)
Product Information
Applicable product:
Drop-in rim style, custom pump and heater
Fixture*:
Bathing well:
Basin area, bottom
55-1/4" (140.3 cm) x 23-1/2" (59.7 cm)
Basin area, top
64-1/2" (163.8 cm) x 32" (81.3 cm)
Weight
112 lbs (50.9 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
75 gal (284.1 L)
* Approximate measurements for comparison only.
Pump: 1-speed
Heater: 1.5 kW
Minimum access panel
pump/control (required):
Included components:
Cut-out template
1042020-1-C
Pump/Control Access
10-13/16" (27.5 cm)
72" (182.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1164-HB
V
Hz
A
120
60
7.5
120
60
12.5
20" (50.8 cm) W x
15" (38.1 cm) H
1042557-7
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
19-1/2"
(49.5 cm)
21" (53.3 cm)
3/8" (1 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (177 kg/square meter) loading.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.