Thank you for purchasing our VENTURA BIKE-PACK SYSTEM.
Before use please read all instructions and our Limited Warranty carefully.
To Fit : Honda CBR 1100XX (V- 04)
Super Blackbird
H077/B
L-Brackets
PF13/B
Pack-Rack
SR13/B Sport-Rack
GH13/19/B Grab-Handle
A range of various style packs for the 'Aerodynamic' systems,
along with storm covers and optional shoulder straps (where
applicable) are available.
Check with your local dealer, distributor or contact us direct
for the latest models.
FITTING KIT CONTENTS
LD001/B locking device (fitted to L-Brackets)
1 LK001/S Key
2 M8 x 60 Allenhead bolts (black zp)
2 M8 x 80 Allenhead bolts (black zp)
2 M8 x 17.0 x 1.4 flat washers (black zp)
FITTING INSTRUCTIONS
1
Remove and discard the central tie-down pins, retain the
washers and body spacers.
2
Remove and discard the grab handle tie-down pins,
retain the washers.
3
The L-Brackets bolt at these mountings using the M8 x
60 Allenhead bolts in the front and the M8 x 80
Allenhead bolts in the rear. (Ensure the original body
spacers and washers are retained in their original
positions). Leave slightly loose.
4
Fit the Pack-Rack or Sport-Rack into the L-Brackets,
ensure the rack is level and tighten the mounting bolts
(spare M8 x 17.0 x 1.4 flat washers are provided. These
may be used to space the rear mountings to ensure an
easy fit of the rack if required).
5
Tighten the L-Bracket locking devices by following the
procedure in the General Instructions for Use.
H077B : Issue 6 : July 2011
Manufactured by:
Diagram #1
Legend to Diagram #1:
1.
Original washers
2.
Original body spacer
3.
M8 x 60 Allenhead bolt
4.
M8 x 80 Allenhead bolt
GENERAL INSTRUCTIONS FOR USE
128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand
Telephone +64 (7) 849 4392, Facsimile +64(7) 849 4114
E-mail: dold@ventura-bike.com Internet: www.ventura-bike.com
The following instructions should be
strictly adhered to. Failure to do so may
result in an accident causing injury or
death.
Page 1 of 4