Elesa DD52R-E Instrucciones De Uso página 27

DD52R-E
Parameter
_ _ _ 0 _ _
_ _ 0 _ _ _
0 _ _ _ _ 0
aw. Always mention the source when reproducing our drawings.
Description Available options
Key function
ArCLr : switching from ABS
to REL the counter is set
to zero.
Ar : switching from ABS to
REL the counter is not set
to zero.
OFF : the key is not assigned
to any function in the operating
mode.
Key function
d_tArG : during the
positioning press the key
on the display will appear the
target position to reach.
d_toG0 : during the
positioning press the key
on the display will appear the
distance to reach the target
position.
OFF : the key is not assigned
to any function in the operating
mode.
Key The key combination activates
combination the direct programming of the
function following parameters:
+
P_OrG : parameter OrG
P_StP : parameter StEP
P_OFS : parameter OFFS
OFF : the key combination is not
assigned to any function in the
operating mode.
Direct drive electronic position indicators
Standard
value
ArCLr
OFF
P_OrG
EN
27