Specifications - Echo HCR-165ES Manual De Instrucciones

Specifications

Mass:
Unit, empty tank
Unit, full tank
Volume: Fuel tank
Cutting device:
Type
Cutting length
Pitch
Height
Gear ratio and lubrication:
External Dimensions: length × width × height
Engine:
Type
Engine displacement
Maximum shaft brake power, measured in accordance
with ISO 8893
Engine speed at maximum engine power
Recommended maximum engine speed (With STD at-
tachment installed)
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Sound Pressure Level: (ISO 10517) L
K )
pA
Sound Power Level: (ISO 10517) L
Vibration levels: (ISO 10517) a
Front handle
Rear handle
Uncertainty:K
These specifications are subject to change without notice.
(= L +
pAd pAeq
(= L + K )
WAd WAeq WA
hv,eq
Specifications
HCR-165ES
kg 5.1
kg 5.4
mL 370
Dual action, double sided
mm 639
mm 35
mm 21
5.75 reduction and good quality lithium grease
mm 1172 × 272 × 207
Air cooled Two stroke single cylinder
mL (cm³) 21.2
kW 0.57
r/min 7500
r/min 10300
r/min 3300
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter ; "ES" START (See page 2)
Automatic Centrifugal
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC, FD grade and ECHO
Premium 50 : 1 oil.
50 : 1 (2 %)
L/h 0.4
g/(kW•h) 515.2
dB(A) 98.8
dB(A) 105.7
m/s² 3.6
m/s² 4.8
m/s² 5.0
26
HCR-185ES
5.3
5.6
744
1277 × 272 × 207
98.6
105.4
3.9
4.8
5.0