Samsung DMR77 Serie Manual Del Usuario página 11

MEETING iNSTALLATiON REQUIREMENTS
@
Electrical supply and grounding
To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.
A
CAUTION
WARNING
Never use an extension cord.
When preparing for installation, ensure that your power supply offers:
A 120 Volt 60 Hz 15 AMP fuse or circuit breaker
An individual branch circuit serving only your dishwasher
Your dishwasher must be grounded. If your dishwasher malfunctions or breaks down, grounding
will reduce the risk of electric shock by providing a path of least resistance for the electric
current.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
GROUNDING INSTRUCTIONS
For a permanently connected appliance:
This appliance must be connected to a grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and then connected to
the equipment-grounding terminal or lead on the appliance.
Water supply
Your dishwasher will fill properly when your water pressure is 20-120 psi (140-830 kPa). Water
pressure less than 20 psi (140 kPa) may cause water supply valve failure, not allowing the water
supply valve to shut off completely. Or, it may take the dishwasher longer to fill than what the
controls allow, resulting in your dishwasher turning off. (A fill-time limit, designed to prevent
overflowing/flooding if an internal line becomes loose, is built into the controls.)
Most plumbing supply stores sell water supply lines of various lengths up to 10 feet (305
cm) long.
You can reduce the risk of leaks and water damage by:
,, Making water faucets easily accessible.
,, Turning off faucets when the dishwasher is not in use.
,, Periodically checking for leaks at water supply line fittings.
Z_ Before using your dishwasher for the first time, check all connections at the water supply valve
....... and faucets for leaks.
Flooring
For best performance, your dishwasher must be installed on a solidly constructed floor.
Never install your dishwasher on a platform or poorly supported structure.
Your dishwasher must be properly installed in accordance with the Installation Guide before it is used. If
you did not receive an Installation Guide with your dishwasher, you can receive one by visiting our website
at www.samsung.com.
setting up your dishwasher 11