Audio Pro LIVING LV-HUB Manual Del Propietário página 11

paIrIng Lv-hub, onLy wIth future LIvIng speakers
On lv speakers
rear on lv-HuB
By pairing, you lock your audio pro network from other near by audio pro wireless
networks. features like changing source in different rooms are available. Pairing fea-
ture is only available on newer Living speakers, not
LV1, LV2, LV2e, LV3 or LV-SUB.
pair yOur living speakers witH lv-HuB transmitter
1. press pairing button on lv-HuB for 2 seconds. led starts to flash green.
2. press and hold ZOne/pair button on living speaker for 3 seconds.
led starts to flash green. (see manual for specific lv speaker.)
3. when leds on both transmitter and speaker goes to steady green, the system is
paired.
note:
1. pairing will not work with older living speakers (lv1, lv2, lv2e, lv3 or lv-suB).
2. to unpair system (all speakers in same volume zone will be unpaired):
- disconnect lv-HuB from power.
- while pressing the pairing button, reconnect lv-HuB to power, and hold pairing but-
ton for 6 seconds. all speakers with same House code will now be unpaired.
11