BLUE SKY PHG8732SS Manual Del Usuario página 15

STEP 7
Insert the gas hose [D] into the post
[G], then insert the head assembly [C]
into the post.
Attach the head assembly to the
post using the stainless steel bolts
[DD], which were removed in Step 6.
Tighten bolts securely.
NOTE: The control knob on the head
assembly should be above the decal
on pole.
When applicable, visually check
portions of the hose assembly located
within the confines of the heater post.
DD LL
D C
G
DD
15