TROUBLESHOOTING
PROBLEM
Burner won't light Propane cylinder
Burner flame
is low
Carbon
build-up
or thick
black smoke
POSSIBLE CAUSES
is frosted over
Blockage in orifice
Control knob is not
in the ON position
Gas pressure is low
Outdoor temperature is
less than 40 °F (5 °C) and
tank is less than 1/4 full
Control knob fully ON
Dirt or film on reflector
and burner screen
Blockage in burner
CORRECTION ACTIONS
Wait until the propane
cylinder warms up and
is defrosted
Clear blockage
Turn control knob to ON
Turn cylinder valve OFF
and replace cylinder
Use a full cylinder
Check burner and orifices
for blockage
Clean reflector and
burner screen
Remove blockage and clean
burner inside and outside
27