Brigmton BTPC-PH2 Manual De Instrucciones página 95

4.13 Safety setting
Set locked screen
Lock the touch screen by unlock icon or password to protect your
MID.
Note: After setting screen locked, you should enter the
passcode each time when you startup or screen is locked
Set unlocked picture
1. Click setting application in main interface.
2. Click safe.
3. Click locked the screen.
4. Choose picture in text setting area.
5. Click next following the remind message.
6. The unlocked pattern board pop up, there are nine
touch spots, connect 4 points from vertical, horizontal
or diagonal direction. As Picture 4.10, move your finger
from the screen when finish. The system will record
yous new unlock pattern.
7. Click continue.
8. When you see the reminder, enter the unlock pattern,
then click confirm.
Set unlock PIN code
Picture 4.53
95