Brigmton BTPC-PH2 Manual De Instrucciones página 99

If you need to recovery factory reset, please click reset, as Picture
4.59, if you need to formulate NAND, please click reset tablet.
2.1 4.16 Date and Time
According to the preset, system will voluntorily apply the date, zone,
and time provided by internet.
Manual set date, time and zone
1．Click Setting application procedure.
2．Slide down the screen, then click date and time.
3．Turn off "auto setting of date and time".
4．Turn off "auto setting zone'.
5．Click Zone Selecting, then choose the zone lists. Slide down
the list to view more zones.
6．Click Date setting, then click upper or down buton to adjust
date, month, and year, click setting when you finish
selection.
7．Click Time setting, then click upper or down button to adjust
hour and minute, click AM or PM to change morning or
afternoon ( there is no such selection when you se 24-hour
format). Click Setting to finish.
8．Click 24-hour format, switch between 12-hour or 24-hour
formay, the time format you choose will be used on the alarm
clock.
Picture 4.59
99