Sony BRAVIA KD-75XH95 Serie Guía De Referencia página 5

• For safety reasons, it is strongly recommended
that you use Sony accessories, including:
Wall-Mount Bracket SU-WL850
Wall-Mount Bracket SU-WL450
• Be sure to use the screws supplied with the
Wall-Mount Bracket when attaching the Wall-
Mount Bracket to the TV set. The supplied
screws are designed as indicated by
illustration when measured from the attaching
surface of the Wall-Mount Bracket.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
Use of screws other than those supplied may
result in internal damage to the TV set or
cause it to fall, etc.
10 mm - 12 mm
Screw (M6)
Wall-Mount Bracket
VS
• Be sure to store the unused screws and Table-
Top Stand in a safe place until you are ready to
attach the Table-Top Stand. Keep the screws
away from small children.
* Only on limited region/country/TV model.
1
Remove the screws from the rear of the
TV.
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of the
TV (to make it parallel with the wall).
Note
• If using an electric screwdriver, set the torque at
approximately 1.5 N.m {15 kgf.cm}.
• Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV.
Use only a flat head screwdriver to install the Wall-
Mount Attachment. Use of another tool might result
in over torqueing the Wall-Mount Attachment and
damaging the TV.
Detaching the Table-Top Stand from the TV
1
Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
GB
VS
1.5 N·m
{15 kgf·cm}
5 GB