Technical Characteristics - babymoov A002028 Instrucciones De Uso

Thank you for choosing our Tulipe home/car bottle-warmer. Please read these instructions
carefully for best results.
We also recommend keeping it for further reference.
USING THE APPLIANCE AT HOME
Power supply: 220/230 V - 50 Hz.
Power: 300 W.
Fast:
• 3 minutes ½ for a 240 ml bottle.
• 4 minutes for a 125 ml jar.
• The quantities given in the table are an indication
only; if you think the result is too hot or not hot
enough for your baby, don't hesitate to reduce
or increase the quantities of water. N.B.: the
material and the thickness of the bottle and
the presence of a detachable base are elements
that can affect the bottle's temperature.
• ATTENTION: to elliminate the risk of burns,
always check the temperature of the food
before giving it to your baby. For a bottle,
shake it well to mix the milk. Pour a drop onto
the inside of your wrist to check its
temperature. For a jar, mix the contents and
try it in order to check it is not too hot.
• If the power supply cable gets damaged it must
be replaced by the manufacturer, the after-sales
service or people with similar qualifications, in
order to avoid any risk of danger.
• This appliance is not intended for use by
persons (including children) with impaired
physical, mental, or sensory abilities, or by
persons lacking in experience or knowledge,
unless the person responsible for their safety
has supervised and instructed them in the
use of this appliance.
• Never leave your child without supervision while the appliance
is working.
• Check that your electrical power supply voltage is compatible
with the appliance (see the details indicated beneath the appliance).
• Use this appliance solely to heat baby bottles and jars. Any
other use might prove dangerous.
• Never switch on the appliance before pouring in a sufficient
quantity of water.
• Never add any product of any kind (salt water, medication,
detergents) to the water: this will damage the appliance.
• Never use the bottle warmer in damp surroundings and do not
place directly under the tap. Never immerse the appliance in
water or any other liquid.
• Never leave the appliance close to any source of heat such as
radiators, sunny windows, etc.

TECHNICAL CHARACTERISTICS

Universal: for any kind of baby bottle and jar.
PLEASE COMPLY WITH THESE SAFETY INSTRUCTIONS
TULIPE HOME/CAR BOTTLE-WARMER • Instructions for use
USING THE APPLIANCE IN THE CAR
Power supply: 12 V DC.
Power: 100 W.
WARNINGS
• This appliance can be used by children aged
from 3 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Cleaning
and user maintenance shall not be made by
children unless they are aged from 8 years
and above and supervised. Keep the
appliance and its cord out of reach of children
aged less than 3 years
• Chlidren should be supervised to ensure that
they do not play with the appliance.
• Waste Electrical and Electronic Equipment
should be disposed of by selective collection.
Do not throw electrical and electronic equipment
away with un-sorted household waste, but
dispose of it at a selective collection point.
• This marking indicates that this product
• Always use the bottle warmer on a completely flat and dry
surface, out of the reach of children.
• Do not use the bottle warmer out of doors.
• Always use the baskets to heat bottles and jars, because failure
to do so could damage the appliance.
• Don't leave the bottle or jar to heat too long, this could encourage
the development of germs in the milk or food.
• The bottles will be very hot when they come out of the warmer.
Take care when removing them.
• Do not move the appliance while it is in operation or if it contains
hot water.
• During the heating process the appliance can get very hot.
Never touch anything other than the "On" button.
should not be disposed with other
household wastes throughout the EU.
7