Pfister SANTIAGO LG48 Serie Manual De Instrucciones página 4

Ocultar thumbs Ver también para SANTIAGO LG48 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

13
13A
13 HANDLE INSTALLATION REMOVAL
Turn off water before proceeding! With Valves in "Closed" position, unscrew Fastener
(13A) and remove Handle Hub (13B) from Valve Stem (13C).
14
14 VALVE CARTRIDGE REMOVAL
Turn off water supplies and relieve pressure before working on your faucet.
Remove handles (See Step 13), unscrew Retainer Nut (14A) by turning it counter-
clockwise and lift out Cartridge Assembly (14B) and inspect. Replace parts as
necessary. Reassemble parts by reversing steps.
ENGLISH
13B
13C
DISASSEMBLY
1.
2.
3.
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
14A
14B
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pfisterfaucets.com
4
CAUTION: Maintenance
Replacement parts may be available at the store where you purchased
your faucet.
When replacement parts are not available, please write or call Pfister
Consumer Service.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
• Installation Support
• Care and Warranty Information

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Santiago lf-048-st0c

Tabla de contenido