Using The Product As Intended; Safety Notes; Important Notes; Contents - marklin 216 Serie Manual De Instrucciones

Ocultar thumbs Ver también para 216 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13

1. Using the Product as Intended

This locomotive is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital
or DCC).

2. Safety Notes

Make sure you read the following safety notes before using
this Märklin product for the first time.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer (example: DC 18V / max. 36VA).
• Pay close attention to the safety notes in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• WARNING! Not suitable for children under 3 years.
Sharp edges and points required for operation. Danger
of choking due to detachable small parts that may be
swallowed. Misuse of the switched mode power pack
can cause an electrical shock.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.

2.1 Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by
adults.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.

3. Contents

1 x Locomotive
1 x Set of instructions for use
1 x Warranty card

4. Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 216 140-4
• Address set at the factory: MM 72 / DCC 03
• Setting the locomotive parameters (address, accelerati-
on/braking delay, maximum speed): with the Control Unit,
Mobile Station, Central Station.
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover
feature are available in analog operation.
Märklin Start up can be added to and expanded with
Märklin H0 or Märklin Digital. See your authorized Märklin
dealer for advice.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

36218

Tabla de contenido