Home Decorators Collection EMSWELL Guía De Uso Y Cuidado página 7

Assembly - Attaching the Light Kit Pan
1
Attaching the light kit pan
□
Remove one screw (EE) from the black bracket below fan
motor assembly (E), loosen but do not remove the other two
screws.
□
Push the light kit pan (F) up to the fan motor assembly (E)
so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit pan (F) clockwise.
□
Re-install the screw (EE) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
Assembly - Attaching the Fan Blades
1
Attaching the blades to the blade
brackets
□
Attach a blade (H) to blade bracket (G) using the decorative
nuts (DD) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(H) and blade bracket (G) and into the decorative nut (DD).
□
Tighten each screw securely.
□
Repeat these steps for each blade (H) and blade bracket (G).
2
Fastening the blade assemblies to
the motor
□
Attaching the blade assemblies to the motor by aligning the
two screws holes in the blade bracket with the screw holes
in the center flywheel and secure with screws (CC).
□
Repeat this step for the remaining blade assemblies.
H
7
Please contact 1-800-986-3460 for further assistance.
E
F
EE
AA
G
DD
CC
E
HOMEDEPOT.COM/HOMEDECORATORS