Remington REVEAL FC1000GP Manual De Instrucciones página 6

ENGLISH
, NOTE: If you suffer from sensitive skin, we recommend selecting speed setting
1 for the first few uses. If you do not experience any skin reactions then
speeds 2 & 3 may be used.
• The Cleansing Brush also comes equipped with a one minute timer to help
ensure thorough cleansing of the whole face.
We recommend cleansing in 3 sections: T-Zone (1), Right side (2) and Left side
(3). Fig. 2.
• The cleansing brush will gently pause every 20 seconds to indicate when to
move to the next zone
• The cleansing brush will automatically switch off after 60 seconds to indicate
the end of the brushing time.
, NOTE: If you change speed settings during cleansing, the timer will set back
to zero and the timer will start again.
F HOW TO USE
1 Select the brush head to suit your skin type and
cleansing need. Gently push the bush head onto the
cleansing brush handle until you hear a click. Fig. 3.
2 Moisten the brush bristles by running under water.
, NOTE: DO NOT use the cleaning brush whilst
completely dry as this can cause skin irritation.
3 Dampen your skin with water and apply cleanser onto
your skin. Alternatively, apply your cleanser directly
onto the brush.
4 Place the cleansing brush directly onto your skin.
5 Switch on using the On/Off button.
6 Select the speed:
• The cleansing brush will automatically start on speed
one
• Press the button again for speed 2
6
Fig. 2
1
3
2
Fig. 3