ASROCK PV530A-ITX Manual De Instrucciones página 12

Idiomas disponibles

2.4 Expansion Slots (PCI and PCI Express Slots)

There is 1 PCI slot on this motherboard.

PCI Slot:

PCI slot is used to install expansion card that has the 32-bit PCI

interface.

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3.

Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4.

Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5.

Fasten the card to the chassis with screws.

Step 6.

Replace the system cover.

ASRock PV530A-ITX Motherboard

1 1