peerless-AV ACCXT101 Instalación Y Montaje página 3

1
Display mount must be removed from display prior
to installing speaker mount. Attach mount bracket
(G) to display mount using M4, M5 or M6 screws
provided with your display mount.
NOTE: M8 screws cannot be used with this
accessory. NOTE: See your display mount
instructions for details.
G
M4, M5, M6 SCREWS
3 Attach two vertical brackets (A) to the speakers.
Be sure to position the vertical brackets in opposite
directions as shown.
A
DISPLAY MOUNT
2 Attach mounting tubes (B) to the mount bracket
(G) using two mounting clamps (D) two self tapping
screws (E) and two washers (F). NOTE: Do not fully
tighten screws (E) until step 5.
B
F
E
3 of 14
ISSUED: 07-28-11 SHEET #: 120-9117-4 09-26-12
D
G