Troubleshooting - Steren INV-300 Manual De Instrucciones

Problem
Noise in the audio sys-
tem when the inverter
is in use
Interference in the
TV when you use the
inverter
There are interference
on the TV when the
inverter is in use
Output voltage is not
correct
Can not handle the
charge

TROUBLESHOOTING

▪ Some medium quality audio equipment may present this pro-
blem, purchase a high quality AC line filter.
▪ Change the TV's position.
▪ Adjust the antenna.
▪ Check the connection and make sure that is right.
▪ The inverter is in a protective state.
▪ Use a digital or analog voltmeter.
▪ Use a true reading voltmeter (RMS).
▪ The voltage of the DC source is very high or very low
▪ The charge is very large or the power is greater than the
average.
▪ Use a lower load.
▪ The wiring does not meet the requirements or the connection is
not secure.
▪ Use wire or wire of the proper size.
▪ The startup power of the application is up to 2 times the
average.
Solutions
26