Philips SBC SC362 Modo De Empleo página 3

A
3
4
2
1
9
B
2
3
1
4
10
5
6
7
8
5
6
7
9V DC 8
9V DC
9
A-1 Power light --------------------------
A-2 Transmit light -----------------------
GB
A-3 Talk pushbutton --------------------
A-4 Microphone -------------------------
A-5 DC power supply socket --------
A-6 Mode switch ------------------------
VOICE : baby monitoring mode; microphone is sound activated
OFF : switches off the Baby unit completely
A-7 Channel selection switch --------
A-8 Battery compartment cover -----
A-9 AC power adapter ----------------
B-1 Power light --------------------------
B-2 Loudspeaker ------------------------
B-3 Loudspeaker Volume control /
Off switch -------------------------
B-4 Power base -------------------------
B-5 Battery compartment cover -----
B-6 Channel selection switch --------
B-7 Belt clip ------------------------------
B-8 DC power supply socket --------
B-9 AC power adapter ----------------
B-10 Power base light -------------------
B
ABY UNIT
lights when unit is powered; flashes when batteries are low
lights when a sound is being transmitted
push this button to talk
high-sensitivity microphone
plug mains adapter connector into this socket
select channel A or B (whichever has least interference)
unscrew and unclip to insert batteries
plug into AC mains socket and into DC power supply socket
P
ARENT UNIT
lights when unit is powered; flashes when batteries are low
provides clear sound
• set loudspeaker level;
• switches off the power to the unit completely
place unit in base to operate it on mains power
unclip to replace batteries
select channel A or B (same as Baby unit)
handy clip for carrying the unit
plug mains adapter connector into this socket
plug into AC mains socket and into DC power supply socket
lights when unit is in the base
3