Choice Of The Installation Site - Bonnet Neve MULTITINY PLUS Instrucciones De Uso

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
Attention!
It is strictly necessary to comply with the max loads indicated
(Kg) for each shelf to avoid deformation or breakage.
4. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the use of fork-lift trucks.
For each subsequent handling of the cabinet, the use of the wooden platform is recommended.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon wrapping.
It must only be handled using a fork lift truck with adequate power to the load. Positioning the appliance horizontally or on its side or
upside down is to be strictly avoided.
The equipment MUST be kept vertical.
5. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and
installation operations.
During unloading and movement operations, avoid tilting the machine and avoid
sudden manoeuvres. The unit is shipped anchored onto a wooden base and protected
by corner posts, cardboard top and nylon wrapping. Keep all packaging away from
children. For each subsequent handling of the cabinet, the use of the wooden platform
is recommended. Carefully remove the packaging, taking care not to damage the
components and not to throw away those that will be needed for assembly.
Keep all packaging away from children.
ATTENTION! After unpacking, check that the appliance has not
suffered damage during transportation.
To unpack the bench proceed as follows:
1. Unscrew the screws and remove the wooden cage
2. Remove the plastic cover
3. Unscrew the reinforcement and remove the parts of the base indicated in the figure.
4. Using forklift the bench.
5. Remove the wooden base.
6. Position the bench adjusting the feet.
6.

CHOICE OF THE INSTALLATION SITE

In selecting the place of installation, ensure that the following instructions are observed, this being vital for
proper and troublefree working of the cabinet:
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
• Keep the air intake and outlet area around the plinth
area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good
circulation of air around it; also the area around the
condensing unit should not be obstructed by boxes
or other objects; keep a distance from the wall of 10
cm at least.
MULTITINY PLUS
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
Handling is reserved to the authorised after-sales service.
Air-Condi�on
1 4 / 5 2
PAGE
UM000449
N° DOC
25 Kg
25 Kg
25 Kg
25 Kg
25 Kg
25 Kg
25 Kg