4. Once the tank is attached to the regulator,
make sure the propane gas tank sits on the
metal stand inside drawer (C) completely. Turn the
preassembled wing screw on the outer part of
metal stand clockwise to secure the propane gas
tank tightly.
C
5. Close the drawer (C).
C
B
6. Remove the rubber cap on the electronic ignit r
(J) by unscrewing and slide battery (H) into the
battery slot. Make sure the positive side of the
battery faces outwards. Screw the electronic
ignit r cap (J) over the battery tightly.
J
H
1-866-771-2663 | Page 7